Araştırma Makalesi
BibTex RIS Kaynak Göster

INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD

Yıl 2023, Cilt: 28 Sayı: 2, 523 - 536, 31.08.2023

Emre Kurt Umut Efe Karaçay Mümin Tutar

https://doi.org/10.17482/uumfd.1220597

Öz

Recently, the studies on lightweighting have gained significant importance due to requirements such as energy efficiency and sustainability. Polymer materials are a group of materials that are frequently used for this purpose. This study investigated the effects of laser power, cutting speed and focal point on the kerf width, which are the most effective process parameters in laser cutting of Polymethylmethacrylate, a low-cost polymer material, using Response Surface Methodology and ANOVA. The results obtained from the data analysis show that the kerf width is seriously affected by the focal point depth as well as the speed and power.

Anahtar Kelimeler

Laser cutting PMMA Response Surface Method

Kaynakça

  • 1. Ahmed, N., Alahmari, A. M., Darwish, S., and Naveed, M. (2016). Laser beam micro-milling of nickel alloy: dimensional variations and RSM optimization of laser parameters. Applied Physics A, 122, 1-16. doi.org/10.1007/s00339-016-0553-2
  • 2. Alahmari, A. M., Darwish, S., and Ahmed, N. (2016). Laser beam micro-milling (LBMM) of selected aerospace alloys. The International Journal of Advanced Manufacturing Technology, 86, 2411-2431. doi.org/10.1007/s00170-015-8318-1
  • 3. Aniszewska, M., Maciak, A., Zychowicz, W., Zowczak, W., Mühlke, T., Christoph, B., ... and Sujecki, S. (2020). Infrared laser application to wood cutting. Materials, 13(22), 5222. doi.org/10.3390/ma13225222
  • 4. Becker, H., and Locascio, L. E. (2002). Polymer microfluidic devices. Talanta, 56(2), 267-287. doi.org/10.1016/S0039-9140(01)00594-X
  • 5. Bora, M. Ö. (2014). The influence of heat treatment on scratch behavior of polymethylmethacrylate (PMMA). Tribology International, 78, 75-83. doi.org/10.1016/j.triboint.2014.04.030
  • 6. Borse, S. C., and Kadam, M. S. (2018). Experimental Study in micromilling of Inconel 718 by fiber laser machining. Procedia Manufacturing, 20, 213-218. doi.org/10.1016/j.promfg.2018.02.031
  • 7. Cavdar, K., and Tanrısever, T. (2013). Farklı Malzemelerin Lazerle Kesilmesi. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 18(2), 79-99. doi.org/10.17482/uujfe.99888
  • 8. Dudala, S., Rao, L. T., Dubey, S. K., Javed, A., and Goel, S. (2020). Experimental characterization to fabricate CO2 laser ablated PMMA microchannel with homogeneous surface. Materials Today: Proceedings, 28, 804-807. doi.org/10.1016/j.matpr.2019.12.302
  • 9. Falco, M., Simari, C., Ferrara, C., Nair, J. R., Meligrana, G., Bella, F., ... and Gerbaldi, C. (2019). Understanding the effect of UV-induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-based polymer electrolytes. Langmuir, 35(25), 8210-8219. doi.org/10.1021/acs.langmuir.9b00041.
  • 10. Georgopoulou, A., Kummerlöwe, C., and Clemens, F. (2020). Effect of the elastomer matrix on thermoplastic elastomer-based strain sensor fiber composites. Sensors, 20(8), 2399. doi.org/10.3390/s20082399
  • 11. Ghosal, A., and Manna, A. (2013). Response surface method based optimization of ytterbium fiber laser parameter during machining of Al/Al2O3-MMC. Optics & Laser Technology, 46, 67-76. doi.org/10.1016/j.optlastec.2012.04.030
  • 12. Kamal, A., Elsheikh, A. H., and Showaib, E. (2020, November). Pre-Cracking techniques of polymeric materials: an overview. In IOP Conference Series: Materials Science and Engineering (Vol. 973, No. 1, p. 012028). IOP Publishing. doi.org/10.1088/1757-899X/973/1/012028
  • 13. Khamar, P., and Prakash, S. (2020). Investigation of dimensional accuracy in CO2 laser cutting of PMMA. Materials Today: Proceedings, 28, 2381-2386. doi.org/10.1016/J.MATPR.2020.04.711
  • 14. Khoshaim, A. B., Elsheikh, A. H., Moustafa, E. B., Basha, M., and Showaib, E. A. (2021). Experimental investigation on laser cutting of PMMA sheets: Effects of process factors on kerf characteristics. journal of materials research and technology, 11, 235-246. doi.org/10.1016/J.JMRT.2021.01.012
  • 15. Masoud, F., Sapuan, S. M., Mohd Ariffin, M. K. A., Nukman, Y., and Bayraktar, E. (2020). Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12(6), 1332. doi.org/10.3390/polym12061332
  • 16. de Castro Monsores, K. G., da Silva, A. O., Oliveira, S. D. S. A., Rodrigues, J. G. P., and Weber, R. P. (2019). Influence of ultraviolet radiation on polymethylmethacrylate (PMMA). Journal of Materials Research and Technology, 8(5), 3713-3718. doi.org/10.1016/J.JMRT.2019.06.023
  • 17. Piana, G., Bella, F., Geobaldo, F., Meligrana, G., and Gerbaldi, C. (2019). PEO/LAGP hybrid solid polymer electrolytes for ambient temperature lithium batteries by solvent-free,“one pot” preparation. Journal of Energy Storage, 26, 100947. doi.org/10.1016/J.EST.2019.100947
  • 18. Prakash, S., and Kumar, S. (2015). Fabrication of microchannels on transparent PMMA using CO 2 Laser (10.6 μm) for microfluidic applications: An experimental investigation. International Journal of Precision Engineering and Manufacturing, 16, 361-366. doi.org/10.1007/s12541-015-0047-8
  • 19. Sarıkaya, M., and Yılmaz, V. (2018). Optimization and predictive modeling using S/N, RSM, RA and ANNs for micro-electrical discharge drilling of AISI 304 stainless steel. Neural Computing and Applications, 30, 1503-1517. doi.org/10.1007/s00521-016-2775-9
  • 20. Son, S., and Lee, D. (2020). The effect of laser parameters on cutting metallic materials. Materials, 13(20), 4596. doi.org/10.3390/ma13204596
  • 21. Vakili-Tahami, F., Adibeig, M. R., and Hassanifard, S. (2019). Optimizing creep lifetime of friction stir welded PMMA pipes subjected to combined loadings using rheological model. Polymer Testing, 79, 106049. doi.org/10.1016/j.polymertesting.2019.106049
  • 22. Venkatesan, K., Ramanujam, R., & Kuppan, P. (2016). Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718. Optics & Laser Technology, 78, 10-18. doi.org/10.1016/j.optlastec.2015.09.021
  • 23. Yüce, C. (2019). Paslanmaz çelik malzemelerin fiber lazer kesiminde proses parametrelerinin optimizasyonu. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2), 685-696. doi.org/10.17482/uumfd.514168

Pmma Malzemesinin Co2 Lazer Kesiminde İşlem Parametrelerinin Etkisinin Yanıt Yüzey Metodu İle Araştırılması

Yıl 2023, Cilt: 28 Sayı: 2, 523 - 536, 31.08.2023

Emre Kurt Umut Efe Karaçay Mümin Tutar

https://doi.org/10.17482/uumfd.1220597

Öz

Son zamanlarda enerji verimliliği ve sürdürülebilirlik gibi gereksinimler nedeniyle hafifleştirme çalışmaları büyük önem kazanmıştır. Polimer malzemeler bu amaçla sıklıkla kullanılan bir malzeme grubudur. Bu çalışmada, düşük maliyetli bir polimer olan Polymethylmethacrylate malzemesinin lazer kesiminde en etkili işlem parametreleri olan lazer gücü, kesme hızı ve odak noktasının kerf genişliği üzerindeki etkileri Yanıt Yüzey Metodu ve ANOVA kullanılarak incelenmiştir. Veri analizinden elde edilen sonuçlar, çentik genişliğinin hız ve gücün yanı sıra odak noktası derinliğinden ciddi şekilde etkilendiğini göstermektedir.

Anahtar Kelimeler

Lazer kesim PMMA Yanıt Yüzey Metodu

Kaynakça

  • 1. Ahmed, N., Alahmari, A. M., Darwish, S., and Naveed, M. (2016). Laser beam micro-milling of nickel alloy: dimensional variations and RSM optimization of laser parameters. Applied Physics A, 122, 1-16. doi.org/10.1007/s00339-016-0553-2
  • 2. Alahmari, A. M., Darwish, S., and Ahmed, N. (2016). Laser beam micro-milling (LBMM) of selected aerospace alloys. The International Journal of Advanced Manufacturing Technology, 86, 2411-2431. doi.org/10.1007/s00170-015-8318-1
  • 3. Aniszewska, M., Maciak, A., Zychowicz, W., Zowczak, W., Mühlke, T., Christoph, B., ... and Sujecki, S. (2020). Infrared laser application to wood cutting. Materials, 13(22), 5222. doi.org/10.3390/ma13225222
  • 4. Becker, H., and Locascio, L. E. (2002). Polymer microfluidic devices. Talanta, 56(2), 267-287. doi.org/10.1016/S0039-9140(01)00594-X
  • 5. Bora, M. Ö. (2014). The influence of heat treatment on scratch behavior of polymethylmethacrylate (PMMA). Tribology International, 78, 75-83. doi.org/10.1016/j.triboint.2014.04.030
  • 6. Borse, S. C., and Kadam, M. S. (2018). Experimental Study in micromilling of Inconel 718 by fiber laser machining. Procedia Manufacturing, 20, 213-218. doi.org/10.1016/j.promfg.2018.02.031
  • 7. Cavdar, K., and Tanrısever, T. (2013). Farklı Malzemelerin Lazerle Kesilmesi. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 18(2), 79-99. doi.org/10.17482/uujfe.99888
  • 8. Dudala, S., Rao, L. T., Dubey, S. K., Javed, A., and Goel, S. (2020). Experimental characterization to fabricate CO2 laser ablated PMMA microchannel with homogeneous surface. Materials Today: Proceedings, 28, 804-807. doi.org/10.1016/j.matpr.2019.12.302
  • 9. Falco, M., Simari, C., Ferrara, C., Nair, J. R., Meligrana, G., Bella, F., ... and Gerbaldi, C. (2019). Understanding the effect of UV-induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-based polymer electrolytes. Langmuir, 35(25), 8210-8219. doi.org/10.1021/acs.langmuir.9b00041.
  • 10. Georgopoulou, A., Kummerlöwe, C., and Clemens, F. (2020). Effect of the elastomer matrix on thermoplastic elastomer-based strain sensor fiber composites. Sensors, 20(8), 2399. doi.org/10.3390/s20082399
  • 11. Ghosal, A., and Manna, A. (2013). Response surface method based optimization of ytterbium fiber laser parameter during machining of Al/Al2O3-MMC. Optics & Laser Technology, 46, 67-76. doi.org/10.1016/j.optlastec.2012.04.030
  • 12. Kamal, A., Elsheikh, A. H., and Showaib, E. (2020, November). Pre-Cracking techniques of polymeric materials: an overview. In IOP Conference Series: Materials Science and Engineering (Vol. 973, No. 1, p. 012028). IOP Publishing. doi.org/10.1088/1757-899X/973/1/012028
  • 13. Khamar, P., and Prakash, S. (2020). Investigation of dimensional accuracy in CO2 laser cutting of PMMA. Materials Today: Proceedings, 28, 2381-2386. doi.org/10.1016/J.MATPR.2020.04.711
  • 14. Khoshaim, A. B., Elsheikh, A. H., Moustafa, E. B., Basha, M., and Showaib, E. A. (2021). Experimental investigation on laser cutting of PMMA sheets: Effects of process factors on kerf characteristics. journal of materials research and technology, 11, 235-246. doi.org/10.1016/J.JMRT.2021.01.012
  • 15. Masoud, F., Sapuan, S. M., Mohd Ariffin, M. K. A., Nukman, Y., and Bayraktar, E. (2020). Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12(6), 1332. doi.org/10.3390/polym12061332
  • 16. de Castro Monsores, K. G., da Silva, A. O., Oliveira, S. D. S. A., Rodrigues, J. G. P., and Weber, R. P. (2019). Influence of ultraviolet radiation on polymethylmethacrylate (PMMA). Journal of Materials Research and Technology, 8(5), 3713-3718. doi.org/10.1016/J.JMRT.2019.06.023
  • 17. Piana, G., Bella, F., Geobaldo, F., Meligrana, G., and Gerbaldi, C. (2019). PEO/LAGP hybrid solid polymer electrolytes for ambient temperature lithium batteries by solvent-free,“one pot” preparation. Journal of Energy Storage, 26, 100947. doi.org/10.1016/J.EST.2019.100947
  • 18. Prakash, S., and Kumar, S. (2015). Fabrication of microchannels on transparent PMMA using CO 2 Laser (10.6 μm) for microfluidic applications: An experimental investigation. International Journal of Precision Engineering and Manufacturing, 16, 361-366. doi.org/10.1007/s12541-015-0047-8
  • 19. Sarıkaya, M., and Yılmaz, V. (2018). Optimization and predictive modeling using S/N, RSM, RA and ANNs for micro-electrical discharge drilling of AISI 304 stainless steel. Neural Computing and Applications, 30, 1503-1517. doi.org/10.1007/s00521-016-2775-9
  • 20. Son, S., and Lee, D. (2020). The effect of laser parameters on cutting metallic materials. Materials, 13(20), 4596. doi.org/10.3390/ma13204596
  • 21. Vakili-Tahami, F., Adibeig, M. R., and Hassanifard, S. (2019). Optimizing creep lifetime of friction stir welded PMMA pipes subjected to combined loadings using rheological model. Polymer Testing, 79, 106049. doi.org/10.1016/j.polymertesting.2019.106049
  • 22. Venkatesan, K., Ramanujam, R., & Kuppan, P. (2016). Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718. Optics & Laser Technology, 78, 10-18. doi.org/10.1016/j.optlastec.2015.09.021
  • 23. Yüce, C. (2019). Paslanmaz çelik malzemelerin fiber lazer kesiminde proses parametrelerinin optimizasyonu. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2), 685-696. doi.org/10.17482/uumfd.514168
Toplam 23 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Kompozit ve Hibrit Malzemeler
Bölüm Araştırma Makaleleri
Yazarlar

Emre Kurt 0000-0002-8159-0377

Umut Efe Karaçay 0000-0002-4132-8681

Mümin Tutar 0000-0002-7286-3433

Erken Görünüm Tarihi 25 Ağustos 2023
Yayımlanma Tarihi 31 Ağustos 2023
Gönderilme Tarihi 17 Aralık 2022
Kabul Tarihi 14 Temmuz 2023
Yayımlandığı Sayı Yıl 2023 Cilt: 28 Sayı: 2

Kaynak Göster

APA Kurt, E., Karaçay, U. E., & Tutar, M. (2023). INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 28(2), 523-536. https://doi.org/10.17482/uumfd.1220597
AMA Kurt E, Karaçay UE, Tutar M. INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. UUJFE. Ağustos 2023;28(2):523-536. doi:10.17482/uumfd.1220597
Chicago Kurt, Emre, Umut Efe Karaçay, ve Mümin Tutar. “INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28, sy. 2 (Ağustos 2023): 523-36. https://doi.org/10.17482/uumfd.1220597.
EndNote Kurt E, Karaçay UE, Tutar M (01 Ağustos 2023) INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28 2 523–536.
IEEE E. Kurt, U. E. Karaçay, ve M. Tutar, “INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD”, UUJFE, c. 28, sy. 2, ss. 523–536, 2023, doi: 10.17482/uumfd.1220597.
ISNAD Kurt, Emre vd. “INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28/2 (Ağustos 2023), 523-536. https://doi.org/10.17482/uumfd.1220597.
JAMA Kurt E, Karaçay UE, Tutar M. INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. UUJFE. 2023;28:523–536.
MLA Kurt, Emre vd. “INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, c. 28, sy. 2, 2023, ss. 523-36, doi:10.17482/uumfd.1220597.
Vancouver Kurt E, Karaçay UE, Tutar M. INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. UUJFE. 2023;28(2):523-36.

DUYURU:

30.03.2021- Nisan 2021 (26/1) sayımızdan itibaren TR-Dizin yeni kuralları gereği, dergimizde basılacak makalelerde, ilk gönderim aşamasında Telif Hakkı Formu yanısıra, Çıkar Çatışması Bildirim Formu ve Yazar Katkısı Bildirim Formu da tüm yazarlarca imzalanarak gönderilmelidir. Yayınlanacak makalelerde de makale metni içinde "Çıkar Çatışması" ve "Yazar Katkısı" bölümleri yer alacaktır. İlk gönderim aşamasında doldurulması gereken yeni formlara "Yazım Kuralları" ve "Makale Gönderim Süreci" sayfalarımızdan ulaşılabilir. (Değerlendirme süreci bu tarihten önce tamamlanıp basımı bekleyen makalelerin yanısıra değerlendirme süreci devam eden makaleler için, yazarlar tarafından ilgili formlar doldurularak sisteme yüklenmelidir).  Makale şablonları da, bu değişiklik doğrultusunda güncellenmiştir. Tüm yazarlarımıza önemle duyurulur.

Bursa Uludağ Üniversitesi, Mühendislik Fakültesi Dekanlığı, Görükle Kampüsü, Nilüfer, 16059 Bursa. Tel: (224) 294 1907, Faks: (224) 294 1903, e-posta: mmfd@uludag.edu.tr